Angular Contact Ball Bearings

Angular contact ball bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The larger the contact angle (typically in the range 10 to 45 degrees), the higher the axial load supported, but the lower the radial load.

• Able to accommodate both radial and thrust loads
• Suitable for high speed operation
• Open and sealed versions available
• Highly rigid
• Standard: DIN 616, DIN 628
• Series Single Row: - 7200, 7300
• Series Double Row: - 3200, 3300, 5200, 5300

Single Row Angular Contact Bearings

Single row angular contact ball bearings are self-retaining units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet steel or brass cages. The raceways of the inner and outer rings are offset in relation to each other in the direction of the bearing axis. The bearings are available in open and sealed versions. Their self-alignment capacity is very small.

Double Row Angular Contact Bearings

Double row angular contact ball bearings are units with solid inner and outer rings and ball and cage assemblies with polyamide, sheet steel or brass cages. They correspond in design to single row angular contact ball bearings in pairs in an O arrangement but give a narrower design than these. They differ in the size of their contact angle and the design of the bearing rings.

If you are unable to find the product you require or if you want more information on any of our products or services please contact us.